Casting Stainless Steel Wafer Type Lift Disco Check Valve
The disc check valve consists of four main components: The body, a disc, a spring and a spring retainer. The disc moves in a plane at right angles to the flow of the fluid, resisted by the spring that is held in place by the retainer. The body is designed to act as an integral centring collar that facilitates installation. Where a 'zero leakage' seal is required, a soft seat can be included.It is suitable For use on a wide range of fluids for applications in process lines,Hot water systems, steam and condensate systems etc.
Description
Products name | Casting Stainless Steel Wafer Type Lift Disco Check Valve |
Modle | H71 |
Nominal diameter | 1/2-8" |
Working pressure | 150LB |
Seat | Body seal/Hard seal |
Material | SS316(CF8M). SS304(CF8). |
Applicable Media | Water, Oil, Gas and Corrosive Liquid etc |
Temperature Applicable | -30°C-525°C |
Casting |
PRODUCT