Overview
Flanged Ball Check Valve uses the rubber covered roller as the disc, when, under the action of the medium, can roll up and down along with the integral sliding path inside the valve so as to open or close it. And it features by good tightness, silent close and no production of water hammer.
The body is full waterflow path design, big flow, small resistance and the water head loss is smaller that of the swing type by 50. It is mountable vertically or horizontally and can be used for cold water, hot water, industrial and living sludge pipe networks, especially suitable for the submersible sludge pump.
Description
Technical Parameters | ||||
Model | PN(MPa) | Casting test pressure(MPa) | Seal test pressure (MPa) | Materials of body, bonnet |
HQ44X-10 | 1 | 1.5 | 1.1 | iron or steel |
HQ414-16 | 1.6 | 2.4 | 1.76 | |
Mail part & material | ||||
Body : Cast iron, ductile cast iron ,WCB | ||||
Bonnet : Cast iron, ductile cast iron, WCB | ||||
Ball : cast steel coated with neoprene | ||||
Medium : water and weak corrosive fluid |
Part Materials List
Part | Description | Standard | Special |
1. | Body | Cast Iron | St. Steel, Cast Steel |
2. | Cover | Cast Iron | St. Steel, Cast Steel |
3. | Ball | Nitrile Reinforced | EPDM, Neoprene |
4. | Cover Ring | Nitrile Rubber | Butyle, Viton |
5. | Ball Seat Ring | L. T. Bronze | St. Steel, Hard Rub. |
6. | Fasteners | Carbon Steel | St. Steel |
Principle:
The heart of this valve is a reinforced rubber ball. The unique design of the valve allows free movement of the ball.
The ball moves to open position when the pump starts & allows free flow of liquid without any interference (See Fig.).
As the pump stops, the ball seats firmly against the metal seat due to its own weight & back pressure of the liquid (Mouse over fig.). This results in DROPLESS sealing.
Previous: Three Way Steel Ball Check Vave For Slurry / Mud / Mine / DN150 - DN500
Next: Tri Clamp Sanitary Check Valve With Clamp Liner End , DN25 - DN100 Union Screw Fixed