Home Products Check Valve Swing Check Valve
C95800 Wafer Type Dual Plate Swing Check Valve

C95800 Wafer Type Dual Plate Swing Check Valve

Check valve, also known as non-return valve, its function is to prevent media backflow in the pipeline. The bottom valve of the pump suction close also belongs to the check valve category. The opening and closing parts are opened or closed by the flow and force of the medium to prevent the backflow of the medium from being called a check valve.
Product Details

WAFER TYPE SWING CHEVE VALVE 

     Check valve belongs to automatic valve category, which is mainly used in one-way flow pipe of medium. Only the medium is allowed to flow in one direction to prevent accidents. Usually, the fluid opens the valve disc under pressure and flows from the inlet side to the outlet side.

      The disc of the swing check valve is disc shaped and rotates around the rotating shaft of the seat passage. because the inner channel is streamlined and the flow resistance is smaller than that of the lifting check valve, it is suitable for large caliber situations with low velocity and irregular flow, but not suitable for pulsating flow, and its sealing performance is not as good as that of lifting type. The rotary check valve is divided into three types: single valve type, double valve type and multi half type. These three forms are mainly divided according to the valve caliber, in order to prevent the medium from stopping flow or backflow, and to reduce the hydraulic impact.


Usages

Industry , Light lndustry ,Oil Interests,Water ,Daily life .

Basic Info

  • Model NO.: H76

  • Connection Form: Wafer

  • Flow Direction: Unidirection

  • Test: API 598

  • Specification: 2"-72"

  • Class: 150lb-2500lb

  • Pressure: Ordinary Pressure

  • Material: Bronze

  • Structure: Swing

  • Sealing Form: Bellows Globe Valve

  • Standard: ANSI

  • Transport Package: Sea Worthy

  • Application: Industrial Usage, Water Industrial Usage

 

Pressure Rating and Size:

Class150 11/2"-80"(40-2000mm),Class300 11/2"-60"(40-1500mm),Class600  11/2"-48"(40-1200mm),Class900 2"-48"(50-1200mm),Class1500 2"-24"(50-600mm),Class2500 2"-16"(50-400mm),3000PSI 21/16-203/4",5000PSI 21/16-203/4",10000PSI 21/16-11"

Advantages 

(1). Long service life and good reliability;

(2). Flexible action and good sealing performance;

(3). Smooth flow passageway and small fluid resistance;

(4). Applicable for and easily installed for vertical or horizontal pipelines;

(5). Easy to install between flanges

(6). The fluid pressure makes the deformation of the open spring very fast, which can protect the pipe from the damage of the water hammer.


Matters Need Attention

When placing the pipe, attention should be paid to making the direction of the wafer check valve consistent with the flow direction of the fluid;

1. installed in the vertically placed pipeline. For the horizontal pipeline, vertically place the wafer check valve;                           2.use a telescopic pipe between the wafer check valve and the butterfly valve, do not connect it directly with other valves;         3. avoid adding pipe joints and blockages within the operating radius of the valve plate;            

4. do not install a variable diameter pipe in front or back of the wafer check valve;              

5. when installing the wafer check valve near the elbow, pay attention to leaving enough space;    

6. When installing the wafer check valve at the pump outlet, at least six times the valve diameter is flowed out to ensure that the butterfly plate is finally subjected to fluid action.

7. During installation, the direction of medium flow shall be consistent with the arrow direction marked on the valve body to prevent accidents.

8. The lifting vertical flap check valve shall be installed on the vertical pipe, and the medium flows from bottom to top.

9. The lifting horizontal flap check valve shall be installed on the horizontal pipe.

10. Do not bear the weight of the check valve in the pipeline, and the large check valve shall be independently supported so as not to be managed.

  

  Persisting in the principle of "QUALITY IS LIFE, CUSTOMER IS GOD", we will strive for high efficiency, passion and integrity to provide our customers with high-quality products and superior trade services.

If you have any  questions, please feel free to contact me.your enquiry  will get prompt attention.

we will do out best  to quote you a more competitive price and short delivery time .


Hot Tags: c95800 wafer type dual plate swing check valve China, manufacturer, supplier, factory, quality, cheap, product, Female Threaded Globe Valve, All-weather breathing valve with flame arrestor, Tilting Non-Return Valve, Bolted Bonnet Globe Valve, Butt/Socket Welding Top Entry Ball Valve, breather valve with flame arrestor
Send Inquiry
You Might Also Like