Wafer Dual Plate Check Valve Retainerless Design

Structural Feature Short structural length,only 1/4~1/8 of that of traditional flanged check valve; Low volume,light weight,only 1/4~1/20 of those of traditional flanged check valve; Quick valve disc closedown,low water hammer pressure; Applicable for and easily installed for vertical or...

Product Details

Wafer Dual Plate Check Valve Retainerless Design

Information

The main purpose of the Dual Plate Wafer Check Valve is to perform the work of almost any conventional valve. However, being smaller makes it lighter and, therefore, is more cost efficient to purchase, install and maintain. It is also a silent check valve; because of it's innovative design, it does not slam upon closing.

The Dual Plate Wafer Check Valve plate design and flat seat offer many advantages. The flat seat eliminates any possibility of board snaps in the seat, which snaps occur frequently in other valves. When suspended in a vertical pin, the two plates have a reduced weight which eliminates excessive wear on the plate lugs. This wear can cause the plate to collapse on the seat's open surface, causing the valve to subsequently fail.

An important feature of the Dual Plate Wafer Check Valve is that it does not depend on the pressure or flow to center the plates in relation to the sealing surface in order to make the seal.

Single plate conventional designs, even those having centering guides, require a backpressure and backflow to center the plate to the seat in order to get a non leakage adjustment. This feature becomes extremely risky in the event of reduced flow and the handling of gases at low pressure.

 

Product Range

End Connection: RF,RTJ, BW

Nominal diameter:1.5"~60"(DN40~DN1500)

Pressure range: Class150~2500(PN16~PN420)

Working temperature:-196℃~+560℃

Body material: Carbon steel, Stainless steel, Alloy steel, Bronze


Design Features

Design in accordance with API 594

End to end dimension as per API 594

Flange dimensions in accordance with ASME B16.5, ASME B16.47

Inspection and Test according to API 598

NACE MR-0175 Service

Availability LUG design

Availability Double Flange from 12"

Single Spring for 2" to 6"

Double Spring for 8" and up


Material Option:  

Carbon steel  

A216 Gr. WCB, WCC, WCA, etc

Low temperature steel

A352 Gr. LCB, LCC, LC1, etc

Cr-Mo steel

A217 Gr. WC6, WC9, C5, C12, C12A, etc

Stainless Steel

A351 Gr. CF8, CF8M, CF3, CF3M, CF8C, etc

Alloy steel

CN7M alloy 20, CN3M alloy 20 modified, CT15C, etc

Super duplex

A995 Gr. 4A, 5A, CE8MN, CD6MN, CD3MN, etc

Aluminum bronze

B148 C95500, C95600, C95800, etc

Monel

M30C, M35-1, CZ100, etc

Inconel

CY40 inconel 600, etc

Hastelloy

CW2m Hastelly C4, N12MV Hastelloy B, etc

Incoloy

CU5MCuC Incoloy 825, CW6MC Incoloy 625, etc





Inquiry