Structural Feature Short structural length,only 1/4~1/8 of that of traditional flanged check valve; Low volume,light weight,only 1/4~1/20 of those of traditional flanged check valve; Quick valve disc closedown,low water hammer pressure; Applicable for and easily installed for vertical or...
Dual-plate check valves are are bonnetless and mounted between pipe flanges (wafer style). In this case, the valve includes two spring loaded half-moon shaped discs that rotate about their shaft. The actual designs of these valves vary between design models and manufacturers. Most have multiple flat seats. The dual-plate Check Valve disc has short rotational disc travel and responds quickly to flow stoppage or reversal, thus the potential for moderate water hammer does exist. It is somewhat better than the Swing Check Valve at minimizing potential water hammer, but with a much higher pressure drop.
Depending on the design, maintenance effort ranges from relatively simple to difficult. All dual-plate check valves must be removed from the line to perform maintenance due to the bonnetless design. The dual-plate Check Valve also results in a higher pressure drop when compared to a Tilting Disc Check Valve of the same size.
Inline Double Plate
One Piece Body Design
Spring-loaded Disc for Quick Closure
Wafer End Standard, Flanged Ends Available
a) Design&Manufacture: API 6D, API 594
b) Face to Face: API 6D, ASME B16.10, EN 558
c) Connection End: ASME B16.5, EN 1092, JIS B2220
d) Test and Inspection: API 6D, EN 12266, API 598
Size: 2" - 48" or DN50 - DN1200
Pressure Rating: Class150 - Class1500 or PN16 - PN250
Material of Valve Body: WCB, LCB, WC6, WC9, C12, C5, CF8, CF3, CF3M, CF8M, etc.
Equipped with a professional factory, Naibang Valve is a professional manufacturer and supplier of water service wafer dual check valve in China. If you want to buy quality product of various beautiful bags, you can get it at a cheap price from us.