Soft Rubber Seat Gate Valve

Product Range

Standard: DIN F4, DIN F5, BS5163A, AWWA C509 C515 MJ/JIS

Size: DN40 - DN1200

Pressure: PN6/10/16/25

Temperature: -20℃ - 120℃

Operation: Hand Wheel, Gear, Electric, Pneumatic, etc

Application: Potable Water, Sea Water, Sewage etc

Main Material

Main Features

⊙ Shot-blasting

protective surface finished by shot-blasting and the surface is smooth and neatness.

⊙ Flatting seat

Smooth continuous bore way without seating recess, it is not easy to get impurity pilled up.

Making the liquid straightway.

⊙ Treating with rubber

Both inner and outer are coated with advanced knowledge of rubber vulcanization then making

sure of the elasticity of rubber ,and make sure the exact geometry dimension. Rubber and ductile

cast iron valve hand together hardly. This can avoid fall-off due to long-term use.

⊙ Anti- corrosion

Both inner and outer are coated with non-toxic powder epoxy resin to strengthen the capacity of Corrosion

resisting and raise the quality of

water supply.

⊙ Ruggedization

The older ductile iron valve is easy to rupture after being impacted by nonego. It can stop

rupture depend on the good mechanics capability of ductile iron .

⊙ Three “○” sealed ring

With the three “O” – rings, the leakage can be greatly reduced and the “O” – ring can be

replaced under this condition with pressure and without stopping water. The thrust axletree

reduces the frictional resistance and lowers the operational torque. And it can be switch seal

ring without opening and closing.

⊙ Rigid round body

The body is founded minutely, the rigid geometry size ensure inner sealing of valve without any

process.

⊙ Light weight

This body is made of ductile iron, it is 20%-30% lighter than the olds. Easily to fixing and

servicing.