The stem axis and the seat sealing surface is vertical, and it is a very reliable valve to cut off and control.
The characteristics of globe valve:
1. Globe valve's structure is more simple than gate valve's, and it is more convenient in manufacturing and maintenance.
2. Sealing surface is not easy to wear and scratch, and it has a good sealing surface and long service life.
3. When opening and closing, disc's route is small, so the height of globe valve is smaller than gate valve, but the length of structure is longer than gate valve's.
Applicable Temperature: ≤425 ºC
Main Materials: WCB/CF8/CF8M/CF3/CF3M
Applicable Medium: Water / Oil / Gas / Causticity Medium
Pressure Rating: PN10-PN100, 150LB-1500LB
Size Range: 1/2" ~ 4"(DN15-DN100)
Below uses the structure
Full bore or reducing
Ming Ganzhi posture (OS&Y)
The self-centering clamp presses the model
The bold fastening, twines the filling piece sealed type valve cover, the nut connection, all welds the sealed type valve cover as well as the screw joint intrinsic pressure from the tight valve cover
In integral type seal place
Receives the spigot end to conform to ASME B16.11
The thread coupling end (NPT) conforms to ANSI/ASME B1.20.1