Size | DN50 - DN600 |
Design standard | API 609/EN 593 |
End flange | DIN PN10/PN16, BS 4504PN10/PN16, ANSI Class125#/Class150# |
Face to face | API 609/EN 558-1 |
Body | Ductile iron/Cast iron |
Disc | Ductile iron/Ductile iron+Expoy/CF8/CF8M/C95400/C95500 |
Stem | SS420 |
Seat | EPDM/NBR/Viton |
Actuator | Bare shaft/Lever/Gearbox and handwheel/Electric/Pneumatic |
Coating | Epoxy/Nylon |
Suitable medium | Water/Seawater/Sewage/Air/Foodstuff/Oil |
The products are widely used in industries such as water projects, urban water supply & drainage, sewage treatment, electric power, petroleum, petrochemical, heat supply, shipbuilding, medicine and metallurgy. Used in regulating or cutting off medium in pipeline.
Products Feature
1. Centerline structure, with pin on the through shaft or pinless double half shaft design.
2. Disc has two-way bearing, no installation direction requirements.
3. End flange can meet different connection standards at the same time (DN50mm-300mm).
4. Holes for the end flange is drill hole (DN350mm-600mm).
5. Good performance of vulcanized seat, highly stretchable and low torque.
6. Square and short neck, easy to stick scutcheon and cost saving.
Previous: Flange
Next: Basket T-strainer