Gly -150 Type Oil Guaging Hole
Pedal oil hole is used to measure the oil level in the tank and adjust the oil sample. One is set on the top of each tank, mostly near the tank ladder platform.
The diameter of the measuring hole is 150mm, and is provided with a hole cover and loosening bolt which can be sealed. In order to prevent sparks caused by the impact of the hole cover and the iron device when closing, an oil resistant rubber pad or soft metal(copper or aluminum)are embedded in the sealing groove of the hole cover. Since the steel tape used for measurement is in contact with the outlet, it is easy to rub and generate sparks, so a copper(or aluminum alloy)sleeve is embedded inside the hole pipe, or a non-ferrous metal guide groove(tape feeding groove)is installed outside the fixed measuring point.
Carbon steel : A216 Gr. WCB, WCC, WCA, etc
Low temperature steel: A352 Gr. LCB, LCC, LC1, etc
Cr-Mo steel:A217 Gr. WC6, WC9, C5, C12, C12A, etc
Stainless Steel:A351 Gr. CF8, CF8M, CF3, CF3M, CF8C, etc
Alloy steel:CN7M alloy 20, CN3M alloy 20 modified, CT15C, etc
Super duplex:A995 Gr. 4A, 5A, CE8MN, CD6MN, CD3MN, etc
Payment & Shipment
Payment :30%T/T with order ,70% T/T before the shipment .
Package :carton case or wooden case .
Shipment : 25-45days after payment.
Shipping: by air ,by train mby sea .
Port :Ningbo,Shanghai .
If you have any questions, please feel free to contact me.your enquiry will get prompt attention.
we will do out best to quote you a more competitive price and short delivery time .
Previous: No Information
Next: No Information